I, tem_dl, I tem_dl I, tem_dl I, tem_dl I, tem_dl I, tem_dl I, tem_dl

“Tự động hóa” download từ các dịch vụ chia sẻ file trực tuyến

2009-07-10T12:37:00.000+07:00

Thứ Sáu, 10/07/2009 - 6:35 AM

“Tự động hóa” download từ các dịch vụ chia sẻ file trực tuyến

(Dân trí) - Các dịch vụ chia sẻ file trực tuyến ngày càng được nhiều người sử dụng. Tuy nhiên, hạn chế của các dịch vụ này là tốn khá nhiều thời gian để download được nhiều file. Trong trường hợp không muốn phải ngồi cạnh máy để chờ đợi, FreeRapid Downloader sẽ giúp bạn.

Dân trí từng giới thiệu đến bạn tiện ích RapidDownload, cho phép bạn “tự động hóa việc download từ RapidShare”, tuy nhiên, hạn chế của chương trình này là không có 1 giao diện người dùng thân thiện cũng như chỉ hỗ trợ download từ trang chia sẻ RapidShare. Trong trường hợp bạn thường xuyên download từ nhiều trang chia sẻ khác nhau như RapidShare, Megaupload, Badongo, MediaFire hay thậm chí là video từ Youtube… thì FreeRapid Downloader sẽ là trợ thủ cực kỳ đắc lực cho bạn.

FreeRapid Downloader là tiện ích nhỏ gọn và miễn phí cho phép bạn tự động hóa việc download file từ các dịch vụ chia sẻ file trực tuyến thông dụng nhất hiện nay như RapidShare, Megaupload, Mediafire… Những gì bạn cần làm là copy đường link chứa file download, dán vào chương trình và ngồi chờ cho quá trình download hoàn tất mà không cần phải làm thêm bất cứ việc gì. Bạn có thể để máy tự hoạt động mà không cần phải ngồi thường trực bên máy tính để download lần lượt từng file như trước đây.

Download chương trình tại đây. Chương trình yêu cầu cài đặt Java để sử dụng, download và cài đặt tại đây.

Sau khi download, bạn giải nén, kích hoạt file frd.exe để sử dụng chương trình mà không cần phải cài đặt. Giao diện chính của chương trình khá đơn giản và giống với giao diện các chương trình hỗ trợ download mà bạn thường thấy.

Để tiến hành download 1 file từ dịch vụ chia sẻ, ví dụ ở đây, ta download file từ dịch vụ RapidShare, bạn chỉ việc copy đường link download của file đó, click vào Add Url trên giao diện chương trình và dán đường link đó vào khung hiện ra. Thông thường, khi bạn copy đường link đó, khung Add Url của chương trình sẽ hiện ra và dán đường link đó vào danh sách download một cách hoàn toàn tự động. Click vào nút “…” ở mục Save To để chọn vị trí lưu file download. Cuối cùng, nhấn Start để bắt đầu quá trình download.

Tiến hành tương tự với các đường link khác để đưa các file cần download vào danh sách. Nếu bạn tiến hành download nhiều file từ cùng 1 dịch vụ (RapidShare hoặc Megaupload…) thì danh sách download sẽ tiến hành tuần tự, và bạn vẫn sẽ mất khoảng thời gian chờ giữa các lần download (đối với RapidShare), còn nếu bạn tiến hành download đồng thời từ RapidShare và Megaupload hoặc của các dịch vụ khác thì việc donwload vẫn sẽ được tiến hành song song.

Download đồng thời từ RapidShare và MegaUpload

Trong trường hợp nếu file trên các dịch vụ chia sẻ đã bị xóa thì chương trình sẽ thông báo cho bạn biết để kiểm tra lại đường link download. Ngoài ra, nếu download từ dịch vụ MegaUpload, trước khi download, chương trình sẽ yêu cầu bạn điền mã xác nhận mới có thể tiến hành download. Điều này khá giống với việc bạn download trực tiếp từ website của MegaUpload, chỉ khác là bạn không phải chờ 45 giây trước khi download.

Không chỉ hỗ trợ download file từ các trang chia sẻ file trực tuyến, FreeRapid Downloader còn hỗ trợ bạn download video từ Youtube. Tương tự như trên, những gì bạn cần làm là copy đường link chứa video cần download từ Youtube, dán vào khung Add URL của chương trình và nhấn Start, chương trình sẽ tự động download file video (với định dạng flv) mà bạn yêu cầu.

Sau khi quá trình download 1 file kết thúc, bạn click chuột phải vào file đó trong danh sách download của chương trình, chọn Open File để mở file hoặc Open Directory để mở thư mục chứa file đó.

Trong trường hợp bạn không muốn chương trình lưu lại lịch sử các file đã download, tại giao diện của chương trình, bạn chọn Options -> Preferences. Cửa sổ Preferences hiện ra, tại tab General, bạn bỏ đi tùy chọn Use downloads history và nhấn Ok để thiết lập có giá trị.

Ngoài ra, 1 tính năng không thể thiếu đối với 1 chương trình “tự động hóa download”, đó là tính năng tự động tắt máy sau khi quá trình download kết thúc. Để sử dụng tính năng này, từ menu của chương trình, bạn chọn Options -> Auto Shutdown. Tại đây bao gồm các tùy chọn cho phép bạn đơn giản là thoát chương trình (Quit), đặt máy tính vào chế độ Hibernate, Standby hoặc khởi động lại và tắt máy tính sau khi quá trình download các file trong danh sách kết thúc. Chọn Shutdown when Downloads complete để tắt máy sau khi quá trình download hoàn tất. Đây có thể coi là tính năng hữu ích, giúp bạn có thể để máy download file và tự động tắt máy sau khi kết thúc mà không cần phải ngồi thường trực bên máy tính.

Ngoài những dịch vụ chia sẻ file trực tuyến nổi tiếng như RapidShare, MegaUpload hay MediaFire, chương trình còn hỗ trợ download từ rất nhiều các dịch vụ chia sẻ file khác nhau.

Danh sách các dịch vụ chia sẻ file trực tuyến mà chương trình hỗ trợ bao gồm: (Sắp xếp theo thứ tự alphabet): 2shared.com, 4shared.com, badongo.com, bagruj.cz, bitroad.net, cobrashare.sk, czshare.com, dataup.de, depositfiles.com, easyshare.com, edisk.cz, egoshare.com, enterupload.com, filebase.to, filefactory.com, fileflyer.com, filesend.net, flyshare.cz,hellshare.com, hotfile.com,ifile.it,indowebster.com, iskladka.cz,jandown.com,kewlshare.com, leteckaposta.cz, letitbit.net, linkbucks.com, load.to, mediafire.com, megaupload.com, nahraj.cz, netload.in, paid4share.com, quickshare.cz, radikal.ru, RapidShare.com, rapidshare.de, rapidshareuser, savefile.com, sendspace.com, share-rapid, shareator.com, shareonline.biz, stream.cz, subory.sk, tinyurl.com, uloz.cz, uloz.to, ulozisko.sk, ultrashare.net, uploadbox.com, uploaded.to, uploading.com, uploadjockey.com, upnito.sk, uppit.com, usercash.com, webshare.net, wiiupload.net, wikiupload.com, xtraupload.de, yourfiles.biz, youtube.com, ziddu.com, zippyshare.com, zshare.net

Tóm lại, có thể nói rằng FreeRapid Downloader là “trợ thủ” cực kỳ đắc lực cho những ai thường xuyên phải donwload file từ các dịch vụ chia sẻ trực tuyến. Mọi chuyện sẽ được “tự động hóa” hoàn toàn và bạn không còn phải mất quá nhiều công sức và thời gian để chờ và tiến hành download lần lượt từng file như trước đây. Hy vọng, bài viết sẽ hữu ích cho bạn.

Phạm Thế Quang Huy

Split & Join Files + ubuntu

2009-07-08T14:22:00.001+07:00

Posted in command tagged Split at 12:19 pm by bearisusanto

We have a file which size is too big to save in USB Flash drive.
To split it to be a small size so its fit to store in USB is easy in linux platform, use “split” command which has been bundled in GNU Coreutils.

1. As example, we have an iso file (ubuntu-8.04-desktop-i386.iso) which size is 699 Mb
root@hardy:/home/bearisusanto/test# ls -alh
total 700M
-rwx—— 1 bearisusanto root 700M 2008-06-02 03:22 ubuntu-8.04-desktop-i386.iso2. Before doing split process, first make MD5 file from ubuntu-8.04-desktop-i386.iso for ensuring that there is not a change for the file when its join again
root@hardy:/home/bearisusanto/test# md5sum ubuntu-8.04-desktop-i386.iso > MD5SUM.txt
root@hardy:/home/bearisusanto/test# cat MD5SUM.txt
8895167a794c5d8dedcc312fc62f1f1f ubuntu-8.04-desktop-i386.iso

3. For splitting ubuntu-8.04-desktop-i386.iso to be a file which the size maximal 400Mb for each file, we type the command
root@hardy:/home/bearisusanto/test# split -d -b 400m ubuntu-8.04-desktop-i386.iso ubuntu-8.04-desktop-i386.iso.part

4. If we check in the directory, there is two 2 which is the result from splitting process
-rwx—— 1 bearisusanto root 700M 2008-06-02 03:22 ubuntu-8.04-desktop-i386.iso
-rw-r–r– 1 root root 400M 2008-10-31 23:13 ubuntu-8.04-desktop-i386.iso.part00
-rw-r–r– 1 root root 300M 2008-10-31 23:13 ubuntu-8.04-desktop-i386.iso.part01

5. To join the two file to be one file as the same with the original file, we use “cat” command but the original have to be deleted first.
root@hardy:/home/bearisusanto/test# rm ubuntu-8.04-desktop-i386.iso
root@hardy:/home/bearisusanto/test# cat ubuntu-8.04-desktop-i386.iso.part00 ubuntu-8.04-desktop-i386.iso.part01 > ubuntu-8.04-desktop-i386.iso

6. For ensuring that there is no difference with the original file, we have to validate with using MD5SUM.txt which have made for the first time.
root@hardy:/home/bearisusanto/test# md5sum -c MD5SUM.txt
ubuntu-8.04-desktop-i386.iso: OK

Fix Yahoo Problem in Pidgin

2009-07-08T10:11:00.001+07:00

How to: Fix Yahoo Problem in Pidgin

Step-by-step tutorial with screenshots

By Marius Nestor, Linux Editor

21st of June 2009, 17:15 GMT

Adjust text size:

Two days ago, Yahoo! Inc. did something to its messenger servers, something that practically blocked all the Linux IM clients, such as Pidgin, Kopete, Empathy or GyachI. While many of us thought it might be an ISP issue, some very smart people found out the truth: Yahoo! changed the login method! However, at this moment (June 21, 2009), none of the aforementioned Instant Messenger clients for Linux can connect with the Yahoo protocol. This is, of course, not the first time when it happens, and Linux users are treated like outsiders. But, let's not start again with the endless question “Why Yahoo! doesn't update the Linux client?” and let's fix the problem (like we always do).

Below is a step-by-step tutorial for all Ubuntu users that want to connect with their friends via the Yahoo protocol, using the Pidgin Instant Messenger. Why Ubuntu? Because it appears that it is the most popular Linux operating system these days and because there are already packages available for it. Other Linux users can grab the Pidgin 2.5.7 sources or DEB packages (32-bit and 64-bit) right now from Softpedia.

· Right click HERE and choose the "Save Link As..." option. Save the key file on your desktop.

· Go to System -> Administration -> Software Sources...

Enter your password if asked. Go to the second tab, "Third-Party

Software," click on the "Add" button, and paste the line below for your Ubuntu distribution, in the "APT line" field...

Ubuntu 9.10

deb http://ppa.launchpad.net/pidgin-developers/ppa/ubuntu karmic main

Ubuntu 9.04

deb http://ppa.launchpad.net/pidgin-developers/ppa/ubuntu jaunty main

Ubuntu 8.10

deb http://ppa.launchpad.net/pidgin-developers/ppa/ubuntu intrepid main

· Now go to the fourth tab, "Authentication," click the "Import Key File" button, navigate to the location where you've just saved the key file (usually, it is File System/home/YOURUSERNAME/Desktop) and double click it. You will immediately see a new entry called "A1F196A8 2009-01-20 Launchpad PPA for Pidgin Developers".

· Click the “Close” button, then the “Reload” one and wait for the application to close!

· Go to System -> Administration -> Update Manager...

...and update Pidgin to the new version!

Close Pidgin if it was running during the update process and open it again. Yahoo should connect immediately now. And the best part is that your Ubuntu machine will always be updated with the latest versions of the Pidgin messenger, from now on!

Pidgin 2.5.7 on Ubuntu 9.10 Alpha

Alternative Method:

This is for those that can not upgrade to Pidgin 2.5.7 or don't want to.

· Open Pidgin and go to Accounts -> Manage Accounts...

· Click on the Yahoo account and then on the "Modify" button...

· Click on the "Advanced" tab and paste the following line in the "Pager server" field...

cn.scs.msg.yahoo.com

Click the "Save" button, then click the check box in front of the Yahoo account to connect.

For GyachI users:

· Go to Connection -> Connect and choose another server from the drop-down box, such as cn.scs.msg.yahoo.com ...

Credits: Special thanks to the Pidgin developers and to those who created the Ubuntu packages in such a short time!

good link!

2009-06-29T17:56:00.001+07:00

http://itsecureadmin.com/wiki/index.php/OpenLDAP_Multi-Master_Replication

http://www.zytrax.com/books/ldap/ch6/slapd-config.html

No X11 DISPLAY variable was set, but this program performed an operation which requires it.

2009-06-25T13:30:00.002+07:00

root@huynhnguyen-desktop:/desktop-share# ./zdesktop_1_0_build_1593_linux_i686.sh
Unpacking JRE ...
Preparing JRE ...
Starting Installer ...
java.lang.reflect.InvocationTargetException
at java.awt.EventQueue.invokeAndWait(Unknown Source)
at javax.swing.SwingUtilities.invokeAndWait(Unknown Source)
at com.install4j.runtime.installer.Installer.getScreenExecutor(Unknown Source)
at com.install4j.runtime.installer.Installer.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.exe4j.runtime.LauncherEngine.launch(Unknown Source)
at com.install4j.runtime.Launcher.main(Unknown Source)
Caused by: java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.GraphicsEnvironment.checkHeadless(Unknown Source)
at java.awt.Button.(Unknown Source)
at java.awt.Button.(Unknown Source)
at com.install4j.runtime.installer.frontend.WizardScreenExecutor.initAWT(Unknown Source)
at com.install4j.runtime.installer.frontend.WizardScreenExecutor.(Unknown Source)
at com.install4j.runtime.installer.frontend.InstallerWizardScreenExecutor.(Unknown Source)
at com.install4j.runtime.installer.Installer$1.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Could not display the GUI. This application needs access to an X Server.
If you have access there is probably an X library missing.
*******************************************************************
You can also run this application in console mode without
access to an X server by passing the argument -c
*******************************************************************
An error occurred:
java.lang.RuntimeException
Error log: /tmp/install4jError45685.log

Solution:
run the following command to locate .bash_profile

Code:

$cd
$vi .bash_profile
DISPLAY=:0.0
export DISPLAY

u can also add those lines in .bashrc file similarly

Using recovery console:“Invalid Boot.ini” hoặc “Windows could not start” ở Windows XP

2009-06-19T23:50:00.000+07:00

Using recovery console:“Invalid Boot.ini” hoặc “Windows could not start” ở Windows XP: Khắc phục lỗi “Invalid Boot.ini” hoặc “Windows could not start” ở Windows XP - 13/12/2006 9h:35

Máy tính của bạn đang chạy “ngon lành”, tự nhiên vào một buổi “trái gió trở trời” nó không khởi động nữa mà hiện lên một thông báo “lạnh lùng”: Invalid Boot.ini hay Windows could not start because the following file is missing or corrupt: Windows\System32\Hall.dll, bạn sẽ làm gì?

Tới đây thì mọi chuyện trở nên tệ hại vì máy không khởi động vào Windows được nữa mà luôn luôn xuất hiện những báo lỗi đó mỗi lần khởi động máy. Có lẽ bạn sẽ nghĩ đến việc phải cài lại toàn bộ máy tính, nhưng bạn hãy khoan làm công việc “đau khổ” đó, hãy thử cách dưới đây xem sao, có thể sẽ giúp bạn “gỡ một bàn thua trông thấy” đấy:

1- Ở màn hình đầu tiên khi bạn khởi động máy tính, nhấn các phím Ctrl, Esc, Delete hoặc các phím từ F1 đến F12 sao cho cửa sổ cấu hình BIOS hiện ra. Thay đổi lại thứ tự khởi động đầu tiên là ổ đĩa CD-ROM hoặc DVD-ROM và lưu lại thiết lập.

2- Đưa đĩa nguồn Windows XP vào ổ đĩa và khởi động lại máy tính.

3- Khi bạn thấy thông báo “Press any key to boot from CD” xuất hiện thì hãy nhấn một phím bất kỳ để máy tính khởi động từ đĩa CD Windows XP.

4- Chờ trong giây lát và bạn sẽ thấy màn hình thông báo “Welcome to Setup” hiện ra, nhấn phím R để chạy trình Recovery Console. Tại đây, nếu bạn muốn khởi động máy lại mà không thay đổi gì thì chỉ cần nhấn phím Enter. Nếu máy bạn được thiết lập để chạy nhiều hệ điều hành thì hãy chọn một cái để dùng trình Recovery Console, tiếp theo gõ mật khẩu administrator và nhấn Enter.

5- Tại dấu nhắc lệnh, bạn gõ bootcfg /list và nhấn Enter. Danh sách các mục trong file Boot.ini sẽ hiện lên màn hình.

6- Tại dấu nhắc lệnh tiếp theo, bạn gõ bootcfg /rebuild và nhấn Enter. Lệnh này sẽ quét toàn bộ ổ đĩa cứng xem bạn đang dùng những hệ điều hành nào Windows XP, Windows 2000 hay Windows NT và sau đó nó sẽ hiển thị kết quả cho bạn thấy.

7- Tiếp theo bạn sẽ nhận một số thông báo chẳng hạn như dưới đây khi máy đang dùng Windows XP (nếu bạn đang dùng hệ điều hành khác thì cũng không khác nhau mấy):

- Khi gặp thông báo dưới đây thì bạn chỉ cần nhấn Y.

Total Identified Windows Installs : 1

[1] C:\Windows

Add installation to boot list? (Yes/No/All)

- Khi gặp thông báo “Enter Load Identifier”, bạn hãy gõ vào tên hệ điều hành mà bạn đang dùng (Microsoft Windows XP Professional hoặc Microsoft Windows XP Home Edition) và nhấn Enter.

- Khi gặp thông báo “Enter OS Load option”, bạn hãy gõ vào /fastdetect và nhấn Enter.

8- Tiếp theo, bạn gõ Exit và nhấn Enter để thoát khỏi Recovery Console. Bây giờ, máy tính của bạn sẽ khởi động lại và Windows sẽ chạy “ngọt ngào” lại như ngày nào. Chúc bạn thành công!

Nguyễn Hữu Đức

How to fix "genuine windows licence" error!

2009-06-19T23:49:00.000+07:00

How to fix "genuine windows licence" error!: Rename the following files by changing the extension to .old:

• Rename %Windir%\system32\WgaLogon.dll to %Windir%\system32\WgaLogon.old
• Rename %Windir%\system32\WgaTray.exe to %Windir%\system32\WgaTray.old

Restart the computer.

Unregister LegitCheckControl.dll by using Regsvr32. To do this, follow these steps:

a. Click Start, click Run, type cmd, and then click OK.
b. At the command prompt, type the following, and then press ENTER:
Regsvr32 %Windir%\system32\LegitCheckControl.dll /u

Restart the computer.

Click Start, click Run, type cmd, and then click OK.

At the command prompt, delete the following files by typing the Del command. Press ENTER after you type each command.

• Del %Windir%\system32\wgalogon.old
• Del %Windir%\system32\WgaTray.old
• Del %Windir%\system32\LegitCheckControl.dll

At the command prompt, type regedit.

Locate and then right-click the following registry subkeys. Click Delete after you locate each subkey.

• HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\ CurrentVersion\Winlogon\Notify\WgaLogon
• HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows \CurrentVersion\Uninstall\WgaNotify

Lưu ý: %Windir% nghĩa là địa chỉ thư mục Windows trên máy của các bác. Mặc định là C:\windows
copy từ đâu quên rồi a'!

Start ldap with non-root

2009-06-19T09:57:00.002+07:00

On Fri, Aug 15, 2003 at 09:59:36AM -0700, Ben Poliakoff wrote:
> Of course slapd's "-u USER" option will direct it to run as whatever
> arbitrary user, but unless that user is root you'll need to run the
> service on a >1024 high port.

so, if you expect to start ldap with non-root, you must change the port of ldap > 1024. In this case, i'm using 1025 for my ldap .
My OS: FreeBSD

#=========/etc/rc.conf
slapd_enable="YES"
slapd_flags='-h "ldapi://%2fvar%2frun%2fopenldap%2fldapi/ ldap://192.168.1.235:1025/"'
slapd_sockets="/var/run/openldap/ldapi"

Shared object "libintl.so.6" not found

2009-05-13T09:27:00.002+07:00

On Tue, Mar 20, 2007 at 08:19:47AM +0000, Leslie Jensen wrote:

[...]
> I've just been through that! Reinstalling gettext won't solve this!
>
> Take a look in
>
> cd /usr/local/lib
>
> And make a link
> ln -s libintl.so.8 libintl.so.6

You do realise that doing this will cause gettext dependancies to fail
in weird an wonderful ways.

> Also read /usr/ports/UPDATING it says
>
> 20070318:
>   AFFECTS: users of devel/gettext (ie: YOU)
>   AUTHOR: [EMAIL PROTECTED]
>
>   As a result of the upgrade to gettext-0.16.1, the shared library version
>   of libintl has changed, so you will need to rebuild all ports that
>   depend on gettext (ie: most of them, sorry).
>
>   portupgrade -rf gettext

This is the correct solution. Unfortunately, also one of the slowest.
--
Jonathan Chen <[EMAIL PROTECTED]>
----------------------------------------------------------------------
                  "Lots of folks confuse bad management with destiny"
                                                        - Kin Hubbard

yahoo messenger 9.0 5120

2009-05-09T13:17:00.000+07:00

http://rd.software.yahoo.com/msgr/9/standalone/msgr9us.exe

download ipod to pc transfer

2009-03-25T19:12:00.001+07:00

http://rapidshare.com/files/93599996/ImTOO...rchive.net_.rar
Pass: www.softarchive.net

Apache server response codes

2009-03-24T11:21:00.000+07:00

Apache server response codes

Introduction

Whenever a user sends a request to a server, a process called a ‘handshake’ begins where the server and your computer communicate and the server makes sure it can accommodate what your user has requested of it. This means being able to make the connection between the two computers and then completing the transfer of data.

Headers are short fragments of text which are generated by servers to hold information pertaining to each transfer as it occurs. There are four kinds of headers:

General

This holds information about the client (user), the server itself and the protocol being used (like http or ftp).
Entity This holds information about the data that is being transferred.

Request

This holds information about the allowable formats and parameters for the transfer.

Response

This is sent out by the server at the end of a transfer, and includes detailed information, in code form, on the outcome of the transfer.

Response Codes

As a web surfer you've probably become familiar with the dreaded 404 error message and the 500 internal server error.

If you get a 404 make sure your link is correct. Case does matter.A 500 Error is the result of a misconfigured CGI script or a misconfigured .htaccess file,. These are the most well-known server response codes, but there are many more. These numerical codes are grouped — the low numbers are generally ‘good’, and operate silently, while anything over 400 is definitely bad news and will be reported to the user in the form of an error message.

Error Code	Explanation
100-199	Silent Response Codes that signify that a request has been received and is currently being processed.
100	The request has been completed and the rest of the process can continue.
101	The user's request to switch protocols (like from FTP to HTTP) was accepted.
200-299	Silent codes that confirm that requests have completed successfully.
200	Ok — the file which the client requested is available for transfer. This is the response code you want to see all of your users receiving.
201	When new pages are created by posted form data or by a CGI process, this is confirmation that it worked.
202	The client's request was accepted, though not yet processed.
203	The information contained in the entity header is not from the original site, but from a third party server.
204	If you click a link which has no target URL, this response is elicited by the server. It's silent and doesn't warn the user about anything.
205	This allows the server to reset any content returned by a CGI.
206	Partial content — the requested file wasn't downloaded entirely. This is returned when the user presses the stop button before a page is loaded, for example.
300-399	A redirection is occurring from the original request.
300	The requested address refers to more than one file. Depending on how the server is configured, you get an error or a choice of which page you want.
301	Moved Permanently — if the server is set up properly it will automatically redirect the reader to the new location of the file.
302	Found — page has been moved temporarily, and the new URL is available. You should be sent there by the server.
303	This is a "see other" SRC. Data is somewhere else and the GET method is used to retrieve it.
304	Not Modified — if the request header includes an 'if modified since' parameter, this code will be returned if the file has not changed since that date. Search engine robots may generate a lot of these.
400-499	Request is incomplete for some reason.
400	Bad Request — there is a syntax error in the request, and it is denied.
401	The request header did not contain the necessary authentication codes, and the client is denied access.
402	Payment is required. This code is not yet in operation.
403	Forbidden — the client is not allowed to see a certain file. This is also returned at times when the server doesn't want any more visitors.
404	Document not found — the requested file was not found on the server. Possibly because it was deleted, or never existed before. Often caused by misspellings of URLs.
405	The method you are using to access the file is not allowed.
406	The requested file exists but cannot be used as the client system doesn't understand the format the file is configured for.
407	The request must be authorised before it can take place.
408	Request Timeout — the server took longer than its allowed time to process the request. Often caused by heavy net traffic.
409	Too many concurrent requests for a single file.
410	The file used to be in this position, but is there no longer.
411	The request is missing its Content-Length header.
412	A certain configuration is required for this file to be delivered, but the client has not set this up.
413	The requested file was too big to process.
414	The address you entered was overly long for the server.
415	The filetype of the request is unsupported.
500-599	Errors have occurred in the server itself.
500	Internal Server Error — nasty response that is usually caused by a problem in your Perl code when a CGI program is run.
501	The request cannot be carried out by the server.
502	Bad Gateway — the server you're trying to reach is sending back errors.
503	Temporarily Unavailable — the service or file that is being requested is not currently available.
504	The gateway has timed out. Like the 408 timeout error, but this one occurs at the gateway of the server.
505	The HTTP protocol you are asking for is not supported.

Using syslog or syslog-ng with slapd for OpenLDAP logging

2009-03-18T15:06:00.001+07:00

OpenLDAP Quick Tips: Using syslog or syslog-ng with slapd for OpenLDAP logging

Friday, November 14. 2008

Hi All,

Here's my third tip in the "OpenLDAP Quick Tips" series:

"You want to enable logging via syslog or syslog-ng for your directory server":

For syslog, depending on your distro, you would edit /etc/syslog.conf or /etc/rsyslog.conf:

CODE:

# LDAP^[?] logs LOCAL4.* -/var/log/openldap.log

and then restart syslog/rsyslog:

CODE:

/etc/init.d/syslog restart

For syslog-ng, the following will work:

CODE:

source s_all { unix-stream("/dev/log"); internal(); }; destination d_ldap { file("/var/log/ldap^[?].log"); }; filter f_syslog { not facility(auth, authpriv) and not match(slapd); }; filter f_ldap { match("slapd"); }; log { source(s_all); filter(f_syslog); destination(d_syslog); }; log { source(s_all); filter(f_ldap); destination(d_ldap); };

You can also add:

CODE:

options { sync(n); };

and then restart as per your distro tools.

Thanks,

Gavin.

vista + mbr + grub

2009-03-16T21:35:00.001+07:00

So you can boot XP and Ubuntu completely, just not Vista?
This is not a grub error or you wouldn't get a Welcome screen.
Vista needs to be repaired. The first step to try is Testdisk
because the second step of using Vista's Startup Repair makes
some more work of restoring the Ubuntu grub menu to the MBR.

---------------------------------------------------------

I borrowed this advice from meierfra about using
Testdisk. sda is the first drive and sdb is the second drive and so on.

"You might try testdisk to rebuild the Boot sector:

Code:

sudo apt-get install testdisk
sudo testdisk /dev/sda

Choose "proceed" on the first screen, then
"intel"
"advanced",
Select the Windows partition (although it should be selected already) and choose
"boot"
"RebuildBS"

--------------------------------------

RebuildBS uses a backup of your boot sector. If the backup and
the current boot sector are not identical then you want to use
Testdisk to restore the backup (maybe it says write).

If you have a Vista OEM recovery cd, rather than a Vista install cd
http://neosmart.net/blog/2008/window...disc-download/

bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

extract *.tgz

2009-03-10T14:08:00.001+07:00

tar xvzf file.tar.gz
tar xvzf file.tgz

softwares

2009-03-09T08:40:00.002+07:00

windows activation tools
http://www.megaupload.com/?d=R4RYCC6N

administrator log on on vista

2009-03-08T12:21:00.001+07:00

Enable the Administrator Account

Open the command prompt with Administrative privileges by opening the Start Menu, and typing cmd in the search box, and then press Ctrl+Shift+Enter or click the Start orb, All Programs, Accessories, right-click Command Prompt and select Run as administrator.
Type the following in the command prompt and press Enter after:
net user administrator /active:yes
Restart your computer and logon as Administrator.

Note: You might want to set a password for the administrator’s account for at least a little protection.

windows 7 beta 7022 download link

2009-02-24T11:37:00.001+07:00

http://www.mediafire.com/?sharekey=d41442fe707508e2ed24a2875c7fa58eaa2e38b083fce9ca5be6ba49b5870170

Hướng dẫn cài đặt Wireless-G Broadband Router WRT54GS

2009-01-14T08:37:00.000+07:00

Hướng dẫn cài đặt Wireless-G Broadband Router WRT54GS

Hướng dẫn cài đặt Wireless-G Broadband Router WRT54GS

Hướng dẫn cài đặt Wireless-G Broadband Router WRT54GS

WRT54GS hỗ trợ một giải pháp tất cả trong một, chia sẻ kết nối Internet, 4 cổng chuyển mạch, hỗ trợ tính năng điểm truy nhập với tốc độ được tăng 35% so với chuẩn-G. Hỗ trợ các tính năng bảo mật cao cấp: mã hoá không dây WPA2, 802.11x, lọc địa chỉ MAC, tường lửa SPI...

1. Cài đặt WRT54GS như một thiết bị định tuyến
Để cài đặt WRT54GS như một thiết bị định tuyến bạn có thể thực hiện theo các bước sau:
Bước 1: Thay đổi địa chỉ của máy tính theo dải địa chỉ của WRT54GS
Bước 2: Truy nhập vào cấu hình thiết bị qua giao diện web, mở trình duyệt web và vào địa chỉ 192.168.1.1 (địa chỉ mặc định của thiết bị), bạn sẽ được yêu cầu vào Uername và Password mặc định là admin và admin.
Bước 3: Sau khi vào Username và Password bạn sẽ thấy một giao diện như hình phía dưới.
- Chọn chế độ PPPoE và vào Username và Password mặc định là admin và admin
- Nếu bạn muốn WRT54GS cấp địa chỉ IP động cho các máy tính hãy kích chọn Enable tính năng DHCP Server

Chỉ bằng một số bước đơn giản trên là bạn đã cài đặt xong WRT54GS như một thiết bị định tuyến làm nhiệm vụ định tuyến mạng LAN của bạn ra ngoài Internet.

2. Cài đặt tính năng không dây
- Lựa chọn mục Wireless trên giao diện cấu hình bạn sẽ thấy một cửa sổ như hình dưới.
- Tại mục Basic Wireless Settings bạn có thể để mặc định như ban đầu mà không cần thay đổi

- Để thiết lập bảo mật cho mạng không dây bạn chọn Wireless Security và lựa chọn một công nghệ mã hoá phù hợp với mạng của bạn (trong phần này chúng tôi hướng dẫn các bạn thiết lập bảo mật WEP, 64 bits 10hex digits). Các bạn có thể tham khảo hình dưới.

3. Thiết lập máy chủ web, mail...hay một ứng dụng bất kỳ ra ngoài Internet
Bước 1: Trước khi cài đặt tính năng DMZ bạn cần phải đăng ký một tên miền trên www.dyndns.com, kích hoạt tính năng DDNS trên thiết mà bạn có thể tham khảo như hình dưới.

Bước 2: Chọn Application & Gaming -> DMZ -> Enable. Sau đó bạn vào địa chỉ của máy chủ cần đưa ra ngoài Internet

Sau các bước trên các bạn đừng quên kích chọn Save Settings để lưu lại cấu hình đã cài đặt ở từng mục. Khi này các bạn đã có thể chạy các ứng dụng mà mình đã cài đặt.

Chúc bạn vui !!![right][i]Nguồn từ: Cộng Đồng Teen Việt Online - http://Teenv.Net/[/i][/right]

tranmyphuc1988

Super Moderator

Join Date: Mar 2007

Posts: 282

from wimaxpro.org

Eclipse + ./VM terminated Exit code=1

2008-12-19T17:56:00.000+07:00

Solution:
root@svr5:/home/huynhnguyen/workspace/.metadata# cd .plugins/
root@svr5:/home/huynhnguyen/workspace/.metadata/.plugins# ll
total 38
drwxrwxrwx 19 huynhngu wheel 1024 Dec 16 12:32 .
drwxrwxrwx 3 huynhngu wheel 512 Nov 5 2007 ..
drwxrwxrwx 6 huynhngu wheel 512 Dec 16 14:17 org.eclipse.core.resources
drwxrwxrwx 3 huynhngu wheel 512 Nov 5 2007 org.eclipse.core.runtime
drwxrwxrwx 3 huynhngu wheel 512 Nov 5 2007 org.eclipse.debug.core
drwxrwxrwx 2 huynhngu wheel 512 Dec 16 14:15 org.eclipse.debug.ui
drwxrwxrwx 2 huynhngu wheel 512 Nov 5 2007 org.eclipse.help.base
drwxrwxrwx 2 huynhngu wheel 1024 Dec 16 12:43 org.eclipse.jdt.core
drwxrwxrwx 2 huynhngu wheel 512 Nov 5 2007 org.eclipse.jdt.launching
drwxrwxrwx 2 huynhngu wheel 512 Dec 16 12:44 org.eclipse.jdt.ui
drwxrwxrwx 6 huynhngu wheel 512 Dec 16 14:17 org.eclipse.pde.core
drwxrwxrwx 2 huynhngu wheel 512 Dec 16 12:43 org.eclipse.pde.runtime
drwxrwxrwx 2 huynhngu wheel 512 Dec 16 12:41 org.eclipse.pde.ui
drwxr-xr-x 2 huynhngu wheel 512 Dec 16 12:41 org.eclipse.search
drwxrwxrwx 4 huynhngu wheel 512 Nov 5 2007 org.eclipse.tomcat
drwxrwxrwx 2 huynhngu wheel 512 Nov 5 2007 org.eclipse.ui
drwxrwxrwx 2 huynhngu wheel 512 Nov 5 2007 org.eclipse.ui.ide
drwxrwxrwx 2 huynhngu wheel 512 Dec 16 12:34 org.eclipse.ui.workbench
drwxr-xr-x 2 huynhngu wheel 512 Dec 16 12:26 org.eclipse.update.ui
root@svr5:/home/huynhnguyen/workspace/.metadata/.plugins# ll /home/pxtung/workspace/.metadata/.plugins
total 20
drwxr-xr-x 10 pxtung wheel 512 Dec 19 17:03 .
drwxr-xr-x 3 pxtung wheel 512 Dec 19 17:37 ..
drwxr-xr-x 4 pxtung wheel 512 Dec 19 17:03 org.eclipse.core.resources
drwxr-xr-x 3 pxtung wheel 512 Dec 19 17:03 org.eclipse.core.runtime
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.debug.core
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.debug.ui
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.jdt.core
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.jdt.ui
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.ui.ide
drwxr-xr-x 2 pxtung wheel 512 Dec 19 17:03 org.eclipse.ui.workbench
root@svr5:/home/huynhnguyen/workspace/.metadata/.plugins# cp /home/huynhnguyen/workspace/.metadata/.plugins /home/pxtung/workspace/.metadata/.plugins
cp: /home/huynhnguyen/workspace/.metadata/.plugins is a directory (not copied).
root@svr5:/home/huynhnguyen/workspace/.metadata/.plugins# cp /home/huynhnguyen/workspace/.metadata/.plugins/* /home/pxtung/workspace/.metadata/.plugins/
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.pde.core is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.ui.workbench is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.ui.ide is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.ui is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.tomcat is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.search is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.pde.ui is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.pde.runtime is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.update.ui is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.jdt.ui is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.jdt.launching is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.jdt.core is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.help.base is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.debug.ui is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.debug.core is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.core.runtime is a directory (not copied).
cp: /home/huynhnguyen/workspace/.metadata/.plugins/org.eclipse.core.resources is a directory (not copied).
root@svr5:/home/huynhnguyen/workspace/.metadata/.plugins# cp -r /home/huynhnguyen/workspace/.metadata/.plugins/* /home/pxtung/workspace/.metadata/.plugins/

eclipse + Could not reserve enough space for object heap

2008-12-19T13:09:00.002+07:00

FreeBSD の ports を使って eclipse を作ろうとした。しかし、VM の初期化に失敗して全然先に進まない。

===>  Building for eclipse-3.3.2
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
*** Error code 1

Stop in /usr/ports/java/eclipse.
$ make
$ /usr/ports/java/eclipse.

少し問題を追跡したところ、ビルドの為の ant を起動する時に、Java のヒープサイズが大きすぎるのが原因らしい。そこで、-Xmx の値を 1000M から 500M に少なくしたら、問題なくインストールが完了した。


$ vi /ports/tmp/ports/java/eclipse/work/build
#!/bin/sh

#ANT_OPTS=-Xmx1000M; export ANT_OPTS
ANT_OPTS=-Xmx500M; export ANT_OPTS
os=""
ws=""
arch=""

なお、ports をコンパイルしているディレクトリが /ports/tmp なのは、WRKDIRPREFIX=/ports/tmp を /etc/make.conf で設定しているからである。

copy from http://uyota.asablo.jp/blog/2008/09/29/3788262

warning: "YY_MAIN" is not defined

2008-12-19T12:47:00.005+07:00

gmake[4]: Entering directory
`/tmp/usr/ports/devel/kdesdk3/work/kdesdk-3.5.10/kbabel/common/libgettext'
flex -+ -opofiles.cc ./pofiles.ll
/bin/sh /usr/local/bin/libtool --silent --tag=CXX   --mode=compile
c++ -DHAVE_CONFIG_H -I. -I../../..   -D_THREAD_SAFE -pthread -DQT_THREAD_SUPPORT   -I/usr/local/include -I/usr/local/include  -I/usr/local/include -D_GETOPT_H -D_THREAD_SAFE   -Wno-long-long -Wundef -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -fno-strict-aliasing -pipe -march=nocona -fconserve-space -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION  -MT
pofiles.lo -MD -MP -MF .deps/pofiles.Tpo -c -o pofiles.lo pofiles.cc
pofiles.cc:451:5: warning: "YY_STACK_USED" is not defined
pofiles.cc:1519:5: warning: "YY_MAIN" is not defined
In file included from pofiles.cc:250:
/usr/local/include/FlexLexer.h:130: error: expected unqualified-id before
numeric constant
pofiles.cc: In member function 'virtual int GettextBaseFlexLexer::yylex()':
pofiles.cc:576: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc:732: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc:755: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In
constructor 'GettextBaseFlexLexer::GettextBaseFlexLexer(std::istream*,
std::ostream*)':
pofiles.cc:872: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In destructor 'virtual
GettextBaseFlexLexer::~GettextBaseFlexLexer()':
pofiles.cc:884: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'virtual void
GettextBaseFlexLexer::switch_streams(std::istream*, std::ostream*)':
pofiles.cc:891: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'int
GettextBaseFlexLexer::yy_get_next_buffer()':
pofiles.cc:944: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'void GettextBaseFlexLexer::yyunput(int,
char*)':
pofiles.cc:1139: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'int GettextBaseFlexLexer::yyinput()':
pofiles.cc:1181: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'virtual void
GettextBaseFlexLexer::yyrestart(std::istream*)':
pofiles.cc:1240: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc:1243: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'virtual void
GettextBaseFlexLexer::yy_switch_to_buffer(yy_buffer_state*)':
pofiles.cc:1250: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc:1253: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc:1261: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'void
GettextBaseFlexLexer::yy_load_buffer_state()':
pofiles.cc:1275: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'virtual void
GettextBaseFlexLexer::yy_delete_buffer(yy_buffer_state*)':
pofiles.cc:1312: error: 'yy_current_buffer' was not declared in this scope
pofiles.cc: In member function 'void
GettextBaseFlexLexer::yy_flush_buffer(yy_buffer_state*)':
pofiles.cc:1354: error: 'yy_current_buffer' was not declared in this scope
gmake[4]: *** [pofiles.lo] Error 1
gmake[4]: Leaving directory
`/tmp/usr/ports/devel/kdesdk3/work/kdesdk-3.5.10/kbabel/common/libgettext'
gmake[3]: *** [all-recursive] Error 1
gmake[3]: Leaving directory
`/tmp/usr/ports/devel/kdesdk3/work/kdesdk-3.5.10/kbabel/common'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory
`/tmp/usr/ports/devel/kdesdk3/work/kdesdk-3.5.10/kbabel'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/tmp/usr/ports/devel/kdesdk3/work/kdesdk-3.5.10'
gmake: *** [all] Error 2
*** Error code 2

from links the answer from Jason Hale

Solution:

This is a known problem with flex and kdesdk. See the following thread on the kde-freebsd mailing list: http://mail.kde.org/pipermail/kde-fr...er/003894.html
You can try to apply the following patch to the textproc/flex port: http://mail.kde.org/pipermail/kde-fr...ttachment.diff

# cd /usr/port/textproc/flex
#patch < /path/to/patch #pkg_delete -fx flex #make install clean

Alternatively, just build KDE without kdesdk.

vncserver + timeout

2008-12-19T10:06:00.002+07:00

vncserver + Timeout

Solution:
Add IdleTimeout option to command
su user -c "vncserver :#display IdleTimeout=0"

Pango not found. Pango built with Cairo support

2008-12-19T09:55:00.002+07:00

gnome-config: not found
checking Pango flags... gnome-config: not found
configure: error:
*** Pango not found. Pango built with Cairo support is required
*** to build GTK+. See http://www.pango.org for Pango information.


Solution:
It seems pango doesn't find cairo.
Do you have this line in pango/Makefile?
BUILDLINK_API_DEPENDS.cairo+=   cairo>=1.2.2

/libexec/ld-elf.so.1: Shared object "libaudio.so.2" not found, required by "libqt-mt.so.3"

2008-12-18T17:26:00.001+07:00

Warning: connect() failed: : No such file or directory
/libexec/ld-elf.so.1: Shared object "libaudio.so.2" not found, required by "libqt-mt.so.3"
FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.
/libexec/ld-elf.so.1: Shared object "libaudio.so.2" not found, required by "libqt-mt.so.3"
startkde: Shutting down...
Warning: connect() failed: : No such file or directory

Solution:
cd /usr/ports/audio/nas
make install clean

I, tem_dl, I tem_dl I, tem_dl I, tem_dl I, tem_dl I, tem_dl I, tem_dl

“Tự động hóa” download từ các dịch vụ chia sẻ file trực tuyến

“Tự động hóa” download từ các dịch vụ chia sẻ file trực tuyến

Split & Join Files + ubuntu

Fix Yahoo Problem in Pidgin

How to: Fix Yahoo Problem in Pidgin

Step-by-step tutorial with screenshots

good link!

No X11 DISPLAY variable was set, but this program performed an operation which requires it.

Using recovery console:“Invalid Boot.ini” hoặc “Windows could not start” ở Windows XP

How to fix "genuine windows licence" error!

Start ldap with non-root

Shared object "libintl.so.6" not found

yahoo messenger 9.0 5120

download ipod to pc transfer

Apache server response codes

Apache server response codes

Introduction

Headers are short fragments of text which are generated by servers to hold information pertaining to each transfer as it occurs. There are four kinds of headers:

General

This holds information about the client (user), the server itself and the protocol being used (like http or ftp). Entity This holds information about the data that is being transferred.

Request

This holds information about the allowable formats and parameters for the transfer.

Response

This is sent out by the server at the end of a transfer, and includes detailed information, in code form, on the outcome of the transfer.

Using syslog or syslog-ng with slapd for OpenLDAP logging

OpenLDAP Quick Tips: Using syslog or syslog-ng with slapd for OpenLDAP logging

Friday, November 14. 2008

vista + mbr + grub

extract *.tgz

softwares

administrator log on on vista

Enable the Administrator Account

windows 7 beta 7022 download link

Hướng dẫn cài đặt Wireless-G Broadband Router WRT54GS

Eclipse + ./VM terminated Exit code=1

eclipse + Could not reserve enough space for object heap

warning: "YY_MAIN" is not defined

vncserver + timeout

Pango not found. Pango built with Cairo support

/libexec/ld-elf.so.1: Shared object "libaudio.so.2" not found, required by "libqt-mt.so.3"

This holds information about the client (user), the server itself and the protocol being used (like http or ftp).
Entity This holds information about the data that is being transferred.